Open Racks 19″
SN-AIR
Floor-Standing Open Rack, 19″
Overview
SN-AIR is a floor-standing, double-frame 19-inch open rack designed for housing and organising standard 19-inch rack equipment indoors. The open construction provides convenient access to installed equipment from all sides.
The rack consists of two vertical mounting frames connected by adjustable structural elements. The rack depth can be set to 400, 600 or 750 mm, allowing the configuration to be adapted to equipment with different mounting depths.
The double-frame construction supports a distributed static load of up to 500 kg. The rack is supplied flat-packed for self-assembly, reducing transport and storage volume before installation.
The upper protective panel helps protect installed equipment from dust and other solid particles falling from above.
The steel components are finished with a powder coating in RAL 7035 or RAL 9005.
At a glance
- Product family
- SN-AIR
- Category
- Open Rack
- Installation
- Indoor
- Rack standard
- 19 inches
- Assembly
- Flat-Pack
Numbered details in the photo
- Double-frame construction Two vertical mounting frames — front and rear — form the rigid open structure: no side, top or rear panels to remove for access.
- 19-inch upright One of the two vertical 19-inch mounting uprights on the front frame, perforated and drilled to the 19-inch rack standard for direct equipment mounting.
- Upper Protective Panel A steel panel across the top of the frame shields installed equipment from dust and other solid particles falling from above.
- Levelling foot Adjustable levelling feet at each corner of the base compensate for an uneven floor and keep the rack stable.
- Depth Adjustment Cross members bolt the front and rear frames together front-to-back; their bracket holes set the rack depth to 400, 600 or 750 mm.
Key figures
- Height
- 16, 24, 33 or 42 rack units, depending on size
- Width
- 600 millimetres
- Depth
- 400 to 750 millimetres, adjustable to three positions: 400, 600 or 750
- Static Load
- 500 kilograms
Key features
-
Steel Construction
Rigid cold-rolled steel construction
-
Double-Frame Construction
Rigid two-frame open structure
-
19-inch Equipment Mounting
For standard 19-inch rack equipment
-
Access From All Sides
Easy access to installed equipment from all sides
-
Levelling Feet
Adjustable support for stable floor installation
-
Flat-Pack Construction
Supplied unassembled for self-assembly
-
Ventilation Openings
Open structure supports natural airflow around equipment
-
Upper Protective Panel
Protection from dust and falling solid particles
Applications, contents and accessories
Typical applications
- Server Rooms
- Telecommunications Rooms
- Network Distribution Points
- Equipment Rooms
- IT Infrastructure
- LAN / WAN Infrastructure
What's in the box
- Set of 19″ Vertical Uprights
- Set of Frame Cross Members
- Set of Lower Support Brackets
- Set of levelling feet
- Upper Protective Panel
- Mounting Kit
Compatible accessories
-
PDU, 1U, 19″, 6 outlets
-
Vented Shelf
-
Cable Ring Organizer, 1U
Size and configuration matrix
| Depth (mm) | |||
|---|---|---|---|
| 400 | 600 | 750 | |
| 16U 850 mm | Net weight: 17.6 kg | Net weight: 17.6 kg | Net weight: 17.6 kg |
| 24U 1205 mm | Net weight: 19.6 kg | Net weight: 19.6 kg | Net weight: 19.6 kg |
| 33U 1600 mm | Net weight: 21.4 kg | Net weight: 21.4 kg | Net weight: 21.4 kg |
| 42U 2005 mm | Net weight: 24.1 kg | Net weight: 24.1 kg | Net weight: 24.1 kg |
Net weight is given once per height and applies to every depth position — the customer's own weight figures (16U/17.6 kg computed, 24U/19.6 kg, 33U/21.4 kg, 42U/24.1 kg) do not vary by depth, since the depth-adjustment brackets are a small share of the frame's total steel compared to the vertical uprights. This product has no usable-internal-depth figure: unlike an enclosed cabinet, the rack depth setting IS the usable mounting depth, with no rear door or panel to subtract.
Technical drawings
-
Front View
Full description of this drawing
Front elevation, generic for the whole range. Overall height on the left is marked U and varies with the ordered size (16, 24, 33 or 42 rack units, 850–2005 mm). The two horizontal dimensions are fixed 19-inch mounting-frame dimensions, not depth measurements and not size-dependent: 510 mm is the overall external width across the two 19-inch upright profiles of the front frame, and 450 mm minimum is the clear mounting width between them. The nominal overall rack width, given in the size data, is 600 mm. Levelling feet are visible at the base.
-
Side View
Full description of this drawing
Side elevation, drawn at the maximum 750 mm depth setting. The horizontal dimensions run in the depth direction: 750 mm is the overall depth at the maximum setting, 400 and 600 mm are the other two adjustable depth positions set by the depth-adjustment brackets, and 645.5 mm is the internal clear depth at the 750 mm setting (it decreases at the 400 and 600 mm settings). Levelling feet are visible along the base.
-
Top View
Full description of this drawing
Base frame seen from above, drawn at the maximum 750 mm depth setting. The 791 mm dimension is the overall external base depth in that direction with the frame at 750 mm; it decreases at the 400 and 600 mm settings. The depth-adjustment bracket hole pattern along the side profiles sets the three depth positions: 400, 600 and 750 mm.
-
General View
Full description of this drawing
General view of the assembled rack showing how the flat-pack parts relate. The two vertical mounting frames stand at the sides. Cross members connect them front-to-back at the selected depth position, secured with the mounting kit hardware. The upper protective panel closes the top. Levelling feet attach at the base corners.
Standards and certification
- IEC 60297-3-100 19-inch rack dimensions
- EIA-310 19-inch equipment mounting
Colour and ordering
Available finishes
- RAL 7035 Light grey
- RAL 9005 Jet black
Ordering code
SN-AIR-OR-UA-19-[H]U-[W]-[D]-2R-[RAL]
SN-AIR- Series name
OR- Open rack
UA- Unassembled (flat-pack)
19- 19-inch rack standard
[H]- Height in rack units — 16, 24, 33, 42
[W]- Width code — 06 means 600 mm — 06
[D]- Depth range code — 04/075 means adjustable to 400, 600 or 750 mm — 04/075
2R- Double-frame rack
[RAL]- Powder-coat colour — 7035 light grey or 9005 black
Example
SN-AIR-OR-UA-19-33U-06-04/075-2R-7035
33 rack units high, 600 mm wide, depth adjustable to 400, 600 or 750 mm, double-frame construction, RAL 7035 light grey.
The depth setting is a field adjustment on the assembled frame, not a separate ordered configuration — one SKU per height covers all three depth positions.