Outdoor Enclosures
SN-BG Rack Series
Outdoor 19″ Equipment Enclosure, IP54
Overview
Rack Series is a range of single-wall steel outdoor enclosures designed for the installation and protection of 19-inch telecommunications equipment. The equipment is installed vertically on two horizontally positioned 19-inch mounting profiles, providing a compact alternative to conventional horizontal rack mounting. The fully welded enclosure features two quarter-turn locks and a padlock for additional protection against unauthorised access. Suitable for wall or pole mounting. Protection rating: IP54. Finished with a durable outdoor-grade powder coating in RAL 7035.
At a glance
- Series
- Rack Series
- Models
- SN-BG-WP-WD-19-2U-055-05-015 · SN-BG-WP-WD-19-4U-055-05-024 · SN-BG-WP-WD-19-7U-055-05-037
- External dimensions
- 550 by 500 by 150 to 370 millimetres, width by height by depth; depth is 150 for the 2U, 240 for the 4U and 370 for the 7U
- Material
- Steel, fully welded
- Colour
- RAL 7035
- Mounting
- Wall or pole
Numbered details in the photo
- Quarter-Turn Locks Two quarter-turn locks secure the door and provide quick access to the enclosure interior.
- Padlock A keyed padlock provides an additional level of protection against unauthorised access.
- nineteen inch mounting profiles Two horizontal 19″ mounting profiles support standard 19″ equipment in a vertical orientation.
- Door Gasket A continuous gasket around the door perimeter helps protect the enclosure interior against dust and water ingress.
- Cable Entries Cable entries in the enclosure base are fitted with stepped rubber grommets to accommodate different cable diameters.
Key figures
- Construction
- Single-wall steel construction
- Mounting
- Wall or pole mounting
- Protection
- Ingress protection rating IP54
- Rack Standard
- Vertical 19-inch rack format
Key features
-
IP54 Protection
Sealed against dust and splashing water
-
Single-Wall Steel Construction
Fully welded steel body, powder-polymer coated
-
19″ System Compatibility
Fits standard 19″ telecommunications equipment
-
Vertical Equipment Mounting
Equipment mounts vertically on two horizontal profiles
-
Padlock Included
A keyed padlock is supplied, in addition to the two quarter-turn locks
-
Fully Welded Construction
High structural rigidity with no assembly joints
-
Wall or Pole Mounting
Welded mounting ears for wall installation; two pole-mount brackets supplied
-
Grounding
Grounding wire between the door and the body
Applications, contents and accessories
Typical applications
- FTTx and access-network cabinets
- Outdoor 19-inch equipment (media converters, switches, patch panels)
- Pole-mounted distribution
- CCTV and telemetry field cabinets
What's in the box
- Fully welded enclosure body
- Two 19-inch mounting profiles
- Stepped rubber cable grommets (6 for the 2U, 8 for the 4U and 7U)
- Pole-mount bracket x2
- Grounding wire
- Padlock with keys
Compatible accessories
-
Distribution frame
-
Patchcord
-
Splice sleeve
Size and configuration matrix
| Model | Width (mm) | Height (mm) | Depth (mm) | Rack units | Cable entries | Net weight (kg) |
|---|---|---|---|---|---|---|
| SN-BG-WP-WD-19-2U-055-05-015 | 550 mm | 500 mm | 150 mm | 2U | 6 x Ø22 | 13.3 kg |
| SN-BG-WP-WD-19-4U-055-05-024 | 550 mm | 500 mm | 240 mm | 4U | 8 x Ø22 | 15.9 kg |
| SN-BG-WP-WD-19-7U-055-05-037 | 550 mm | 500 mm | 370 mm | 7U | 8 x Ø22 | 18.0 kg |
Each cable-entry hole is 22 mm in diameter, fitted with a stepped rubber grommet. The 2U has 6 entries in the base (3 + 3); the 4U and 7U have 8 (4 + 4). Weights are for the empty enclosure.
Technical drawings
-
Front View
Full description of this drawing
Front elevation, generic for all three models. Overall width 550 mm, height 500 mm; the internal opening is 450 mm wide, offset 160 mm from the top. A welded mounting ear on each side takes an M6 wall-fixing screw. The door carries two quarter-turn cam locks.
-
Side View
Full description of this drawing
Side elevation, generic for all three models; the drawing carries no dimensions. A gasket runs the full perimeter of the door opening. An M8 external grounding stud is on the side wall.
-
Bottom View
Full description of this drawing
Underside of the enclosure. The depth is marked as the range 150-370 mm: 150 mm for the 2U, 240 mm for the 4U, 370 mm for the 7U. Cable-entry holes 22 mm in diameter, each fitted with a stepped rubber grommet. The drawing shows 8 holes (4 + 4) for the 4U and 7U; the 2U has 6 (3 + 3). Centre spacing 32 mm, edge offset 20 mm as marked.
-
General View
Full description of this drawing
Isometric view with the door open. Two horizontal 19-inch mounting profiles span the interior; equipment is fixed to them vertically. The two pole-mount brackets and their tie rods are shown. The door frame carries the perimeter gasket.
Standards and certification
- 2014/35/EU Low Voltage Directive
- 2014/30/EU Electromagnetic Compatibility Directive
- EN 60529:1991/A2:2013/AC:2019-02 Degrees of protection provided by enclosures (IP code)
- EN 61439-1:2011 Low-voltage switchgear and controlgear assemblies — general rules
- EN 61439-3:2012/AC:2019-04 Distribution boards intended to be operated by ordinary persons
- EN 62368-1:2014/AC:2015 Audio/video, information and communication technology equipment — safety
Colour and ordering
Available finishes
- RAL 7035 Light grey
Ordering code
SN-BG-WP-WD-19-[U]U-055-05-[D]
SN-BG- Series name
WP- Wall or pole mounting
WD- Welded construction
19- 19-inch rack standard
[U]- Usable 19-inch equipment height — 2U with 150 mm depth, 4U with 240 mm, 7U with 370 mm — 2, 4, 7
055- Width code — 550 mm
05- Height code — 500 mm
[D]- Depth code — 015 = 150 mm, 024 = 240 mm, 037 = 370 mm
Example
SN-BG-WP-WD-19-4U-055-05-024
Rack Series outdoor enclosure, 550 mm wide, 500 mm high, 240 mm deep, 4U of vertical 19-inch mounting space, RAL 7035, IP54.
Depth and rack units are linked — one SKU per size. There are no door or colour options.