Rack Accessories

SN-CS Cantilever Shelf

19-inch Cantilever Shelf, 2-Point Mounting

Overview

A 1U cantilever shelf, three-quarter view, showing the perforated deck, a front mounting bracket and a formed side support
SN-CS with 5 numbered details, listed below the photo.

Cantilever shelves are designed for installing non-rack-mount equipment in 19-inch cabinets and open racks. The shelf is mounted to the front 19-inch mounting rails only and does not require attachment to the rear mounting rails. The cantilever construction allows installation without rear support. A perforated shelf surface provides free airflow around the installed equipment and supports effective cabinet ventilation. The shelves are available in 1U and 2U heights and a range of depths, depending on the model. Each shelf is individually protected with cardboard packaging; standard transport packaging contains two shelves per carton.

At a glance

Product family
Cantilever Shelf
Category
Rack Accessory
Application
Indoor
Rack standard
19 inch
Mounting type
Cantilever / Front-mounted

Numbered details in the photo

  1. Front Mounting Brackets Provide secure attachment of the shelf to the front 19-inch mounting rails.
  2. Ventilation Perforation Allows cooling air to circulate freely around equipment placed on the shelf.
  3. Front Retaining Edge Helps prevent equipment from sliding forward during operation or servicing.
  4. Rear Retaining Edge Helps keep equipment positioned within the shelf area.
  5. Side Supports Increase structural rigidity and support the shelf under load.

Key figures

Rack Standard
19 inch rack standard
Height
one to two rack units
Depth
150–400mm
Max. Distributed Load
15 kilograms maximum evenly distributed load

Key features

Applications, contents and accessories

Typical applications

  • Installation of non-rack-mount equipment
  • Network and telecom cabinets
  • Open rack installations
  • Auxiliary equipment installation

What's in the box

  • Shelves ×2
  • M6 Mounting Kit ×4 per shelf

Compatible with

  • A 19-inch wall-mount cabinet Wall cabinet
  • A floor-standing 19-inch open rack Open rack
  • A floor-standing 19-inch data cabinet Floor cabinet

Size and configuration matrix

Rows list the ten Cantilever Shelf models. Columns give external dimensions (width by height by depth), the mounting height in rack units, and net weight.
Model Dimensions (W × H × D) (mm) Mounting height Net weight (kg)
SN-CS-19-1U-015 483 × 44 × 150 mm 1U 0.68 kg
SN-CS-19-1U-02 483 × 44 × 200 mm 1U 0.84 kg
SN-CS-19-1U-025 483 × 44 × 250 mm 1U 1.00 kg
SN-CS-19-1U-028 483 × 44 × 280 mm 1U 1.08 kg
SN-CS-19-1U-03 483 × 44 × 300 mm 1U 1.18 kg
SN-CS-19-1U-035 483 × 44 × 350 mm 1U 1.43 kg
SN-CS-19-1U-04 483 × 44 × 400 mm 1U 1.53 kg
SN-CS-19-2U-03 483 × 88 × 300 mm 2U 1.33 kg
SN-CS-19-2U-035 483 × 88 × 350 mm 2U 1.58 kg
SN-CS-19-2U-04 483 × 88 × 400 mm 2U 1.68 kg

Width 482.6 mm across the mounting brackets is common to every model. All cells are equal; the 1U-200, 2U-300 and 2U-400 weights are computed from adjacent measured values.

Technical drawings

Standards and certification

Colour and ordering

Available finishes

Ordering code

SN-CS-19-[U]U-[D]-[RAL]

SN-CS
Series name
19
19-inch rack standard
[U]
Height in rack units — 1U or 2U
[D]
Shelf depth code in metres without the decimal point — 015 = 150 mm to 04 = 400 mm — 015, 02, 025, 028, 03, 035, 04
[RAL]
Powder-coat colour — 7035 light grey or 9005 black

Example SN-CS-19-1U-028-7035 Cantilever shelf, 1U mounting height, 280 mm deep, RAL 7035 light grey.

The 2U shelf is available in 300, 350 and 400 mm depths only. The M6 mounting kit is included with each shelf.

Downloads