Wall-Mount Cabinets 19″
SN-LS-E-2S Two-Section
Wall-Mount Data Cabinet, 19″, Welded Two-Section Body
Overview
SN-LS-E-2S is a wall-mounted two-section 19-inch cabinet designed for housing and organising standard 19-inch rack equipment in indoor environments. It features a fully welded steel construction consisting of a fixed rear section and a hinged front equipment section, providing convenient rear access to installed equipment without removing it from the mounting rails. The cabinet requires no assembly before installation.
The front door is fitted with 4 mm tempered safety glass in a metal frame and secured with a round cam lock. It can be configured for right- or left-hand opening, while perforated and solid metal door versions are also available. The hinged front section is secured to the rear section with a second round cam lock. The mounting rails are supplied as two rails for 500 mm deep cabinets or four rails for 600 mm versions. The side panels are fixed and incorporate passive ventilation openings. The cabinet is mounted to the wall using keyhole slots in the rear section. Every removable metal part is equipped with a grounding stud to ensure reliable protective earthing.
The cabinet is supplied in corrugated cardboard packaging for safe transport and storage.
At a glance
- Product family
- SN-LS-E-2S
- Category
- Wall-Mount Cabinet
- Installation
- Indoor, wall or floor (on optional feet/castors)
- Rack standard
- 19 inches
- Construction
- Welded, two sections, pre-assembled
Numbered details in the photo
- Tempered glass Front door glazed with 4 mm tempered safety glass in a metal frame; here it stands open, and the pane is clear enough that the mounting rails show through it. Perforated and solid metal doors use the same frame.
- Cam lock Round cam lock on the front section. A second lock of the same type holds the front section closed against the rear one, so the equipment stays secured in both states.
- Ventilation Passive ventilation: round perforation runs the full height of the section flanges, and louvred bands are punched into the side panels at the top and the bottom. No fan is required for normal loads.
- 19-inch mounting rails Galvanised vertical rails punched to the 19-inch standard, carried by the swinging front section. Two rails on 500 mm cabinets, four on 600 mm ones.
- Fixed side panel Side panels are solid metal and welded to the body — not removable. Passive ventilation grills are punched along their upper and lower edges.
Key figures
- Height
- 6 to 22 rack units
- Width
- 600 millimetres, fixed for all sizes
- Depth
- 500 or 600 millimetres
- Static Load
- 60 kilograms
- Protection
- IP20 protection rating
Key features
-
Fully Welded Construction
Fully welded sheet-steel body
-
Glass / Perforated / Metal Door
Two cam locks: door and section
-
Ventilation Openings
Side-panel and door vents, passive airflow, natural convection
-
Cable Entry Points
Rear section, upper & lower
-
19-inch Mounting Rails
2 or 4 pcs by depth
-
Grounding
Grounding kit supplied
-
Fan Mounting Positions
Roof & floor, 2 fan seats each
-
Two-Section Body
Fixed rear, hinged front
Applications, contents and accessories
Typical applications
- SOHO environments
- Telecom rooms
- IT closets
- Office networks
- Network distribution points
What's in the box
- Welded cabinet, two sections, assembled
- Front door, fitted
- 19″ mounting rails, fitted
- Grounding kit
- Door and section keys
- No feet or castors — sold separately
Compatible accessories
-
Shelf
-
Levelling feet, M8 (optional)
-
Castors, M8 (optional)
Size and configuration matrix
| External depth (mm) | ||
|---|---|---|
| 500 | 600 | |
| 6U 330 mm | Usable internal depth: 350 mm Net weight: 14.7 kg | Usable internal depth: 450 mm Net weight: 16.8 kg |
| 9U 463 mm | Usable internal depth: 350 mm Net weight: 17.8 kg | Usable internal depth: 450 mm Net weight: 19.9 kg |
| 12U 597 mm | Usable internal depth: 350 mm Net weight: 21.0 kg | Usable internal depth: 450 mm Net weight: 23.05 kg |
| 15U 730 mm | Usable internal depth: 350 mm Net weight: 24.1 kg | Usable internal depth: 450 mm Net weight: 26.2 kg |
| 18U 863 mm | Usable internal depth: 350 mm Net weight: 27.3 kg | Usable internal depth: 450 mm Net weight: 29.4 kg |
| 22U 1040 mm | Usable internal depth: 350 mm Net weight: 31.5 kg | Usable internal depth: 450 mm Net weight: 33.6 kg |
Only the 12U, 600 mm size has been weighed (23.05 kg net). Weights marked † are calculated from it: 1.05 kg per rack unit, taken from the measured SN-LS-E range, and 2.1 kg for the step from 500 to 600 mm depth. Treat them as close estimates, not weighing certificates.
Technical drawings
-
Front View
Full description of this drawing
Front view with the door removed. Overall width is marked 600 mm and is the same for every size; the height is marked with a generic H in rack units, since the range covers six heights. The mounting width between the rails is marked 451 mm, the 19-inch standard. A perforated flange runs the full height on each side, carrying the punched rail, and the right-hand flange carries the round cam lock of the front section. Two cable slots, each marked 250 mm long and 50 mm wide, are cut at the top and at the bottom of the partition between the two sections.
-
Side View
Full description of this drawing
Side view. The depth is marked 500 / 600, the two depths the range is built in; the rear section keeps the same 150 mm in both. That rear section stays fixed to the wall and carries the cabling, while everything in front of it — the rails and the equipment on them — swings out on hinges. The punched 19-inch rail is drawn at the right; the pitch of its holes is marked 25 mm, and the small step between the holes of one U 3.5 mm. One of the four M8 threaded points for an optional foot or castor is marked at the base. Louvred ventilation bands run along the roof and the floor.
-
Top View
Full description of this drawing
The roof seen from above. Depth is marked 500 / 600 on the left, the two depths the range is built in. The narrow band across the top of the view is the rear section; the cable slot over the partition between the sections is marked 250 mm long and 50 mm wide, and the same slot repeats at the bottom of the cabinet. Two circular perforated fan seats sit in the roof, each on a 105 × 105 mm mounting hole pattern; the same pair repeats in the floor, so fans can be fitted at the top or the bottom.
-
Body, Rear Panel and Front Door, Drawn Apart
Full description of this drawing
The welded body is drawn from the front-left with its parts pulled away to the right: first the plain rear panel, then the door leaves — a plain metal leaf and a perforated one, representing the solid and perforated door options on the same body — and the two perforated flanges with their cam locks. The roof carries two circular fan cutouts and a rectangular cable slot, repeated on the floor. Inside, the vertical 19-inch rails are punched with square holes in U increments.
Standards and certification
- IEC 60297-1 / -2 19-inch rack dimensions
- EN 60529 Degrees of protection (IP Code)
- EN 62208 Empty LV switchgear enclosures
- 2014/35/EU Low Voltage Directive (LVD)
Colour and ordering
Available finishes
- RAL 7035 Light grey
- RAL 9005 Jet black
Ordering code
SN-LS-E-2S-WM-WD-19-[H]U-[W]-[D]-[DOOR]-[RAL]
SN-LS-E-2S- Series name
WM- Wall-mounted
WD- Welded construction
19- 19-inch rack standard
[H]- Height in rack units — 6, 9, 12, 15, 18, 22
[W]- Width code — 06 means 600 mm — 06
[D]- Depth code in metres without the decimal point — 05, 06
[DOOR]- Front door — GD glass, PD perforated metal, MD metal
[RAL]- Powder-coat colour — 7035 light grey or 9005 black
Example
SN-LS-E-2S-WM-WD-19-12U-06-06-GD-7035
12 rack units high, 600 mm wide, 600 mm deep — 450 mm of it usable — with a glass door, RAL 7035 light grey.
Feet and castors are ordered separately by SKU (Feet SN-M8 / Castor SN-M8) — see Compatible Accessories. Contact DeepNet Europe or see the full price list for current SKU and colour availability per size.