Outdoor Enclosures

SN-SZTK Fan-Cooled Series

Outdoor Floor-Standing Enclosure, IP54

Overview

SN-SZTK Fan-Cooled Series floor-standing enclosure in a studio shot with the door open, showing door-mounted cooling fans, the internal heater, the 3U electrical control panel across the top, the 19-inch mounting rails, the floor plinth and the yellow-green grounding wire between door and body
SN-SZTK with 5 numbered details, listed below the photo.

Floor-Standing Fan-Cooled Series is a range of double-wall steel outdoor enclosures designed for the installation and protection of 19-inch telecommunications equipment. The double-wall construction with non-combustible A1-class mineral-wool insulation reduces heat loss in cold weather and protects the enclosure interior from excessive heating in summer. Front and rear doors provide convenient access to installed equipment. Filtered forced ventilation and an integrated heater provide temperature control inside the enclosure. Two pairs of adjustable 19-inch mounting rails allow the mounting depth to be adapted to the installed equipment. The enclosure is equipped with a removable roof and a floor plinth.

At a glance

Series
Fan-Cooled Series
Models
SN-SZTK-FS-WD-19-24U-065-085 · SN-SZTK-FS-WD-19-33U-065-085 · SN-SZTK-FS-WD-19-42U-065-085
Usable rack space
21U / 30U / 39U
Construction
Double-wall steel, A1 mineral-wool insulation
Access
Front and rear doors
Climate control
Filtered forced ventilation + integrated heater
Mounting
Concrete foundation or support frame

Numbered details in the photo

  1. Filtered Ventilation Upper fans extract warm air; lower filtered inlet supplies outside air.
  2. nineteen inch mounting rails Two pairs of adjustable rails allow the mounting depth to match the installed equipment.
  3. Double-Wall Body Double-wall steel construction with A1-class mineral-wool insulation.
  4. Removable Roof The roof projects beyond the cabinet body and is supplied separately to reduce transit damage.
  5. Floor Plinth Fixing holes in the plinth allow the enclosure to be secured to a concrete foundation using suitable anchors.

Key figures

Height
24, 33 or 42 rack units
Width
660mm
Depth
850mm
Static Load
Static load 800 kilograms
Protection
Ingress protection rating IP54

Key features

Applications, contents and accessories

Typical applications

  • Outdoor Telecommunications Networks
  • Mobile Network Infrastructure
  • Outdoor Network Distribution Points
  • Remote Equipment Sites
  • Industrial Communication Systems
  • CCTV and Security Infrastructure

What's in the box

  • 19″ Mounting Rails
  • 3U Electrical Control Panel
  • Cooling Fan Units
  • Heater
  • Cable Entry Panel
  • Door Opening Sensor
  • Removable Roof
  • Floor Plinth
  • Key Set
  • Technical Documentation

Compatible accessories

  • 19-inch cable management organizer Cable organizer
  • 19-inch rack power distribution unit PDU
  • 19-inch rack equipment shelf Shelf

Size and configuration matrix

Rows list the three SN-SZTK floor-standing models. Columns give usable rack space, total rack capacity, external height, cabinet body width and depth, usable mounting depth, and net weight.
Model Usable Rack Space (U) Total Rack Capacity (U) External Height (mm) Cabinet Body Width (mm) Cabinet Body Depth (mm) Usable Mounting Depth (mm) Net Weight (kg)
SN-SZTK-FS-WD-19-24U-065-085 21 U 24 U 1255 mm 660 mm 850 mm 600 mm 164.5 kg
SN-SZTK-FS-WD-19-33U-065-085 30 U 33 U 1658 mm 660 mm 850 mm 600 mm 199.5 kg
SN-SZTK-FS-WD-19-42U-065-085 39 U 42 U 2058 mm 660 mm 850 mm 600 mm 232.4 kg

The removable roof projects beyond the cabinet body; overall dimensions including the roof are shown in the technical drawings. The top 3U of the frame are permanently occupied by the factory-installed 3U electrical control panel. Net weight includes the removable roof. The removable roof is supplied separately from the enclosure body to reduce the risk of damage during transportation.

Technical drawings

Equipment and control panel

Factory-installed equipment

Equipment fitted at the factory, with specification and quantity.
Item Specification Qty
Cooling Fan 160 m³/h, 230 V AC 4 pcs
Dust Filters Replaceable dust-filter insert, 2–3 mm 8 pcs
Heater 400 W, 230 V AC 1 pc
Door Opening Sensor Magnetic reed contact sensor 2 pcs
Cable Entry Panel Fitted with 12 cable glands: 2 × PG13.5, 7 × PG21, 3 × PG29 1 pc
3U Electrical Control Panel Occupies the top 3U of the frame 1 pc

3U electrical control panel — components

Components of the factory-fitted 3U electrical control panel, with specification and quantity.
Component Specification Qty
Circuit Breaker 1P, 16 A 2 pcs
Circuit Breaker 1P, 6 A 1 pc
Cooling Thermostat Mechanical 1 pc
Heating Thermostat Mechanical 1 pc
DIN-Rail Schuko Socket 16 A, 230 V AC 1 pc
DIN-Rail Neutral Busbar Insulated, 6 × 9 mm, 10 terminals 1 pc

Optional equipment and systems

Optional equipment and systems available for this enclosure, grouped by function.
Group Includes
Sensors & Monitoring Flood sensors, smoke sensors, vibration sensors, monitoring systems
Safety Systems Door status monitoring, alarm signalling devices
Power Distribution & Protection Additional circuit breakers, surge protection modules, sockets, generator inlet connectors, PDUs
Backup Power Power supply systems, batteries

Standards and certification

Colour and ordering

Available finishes

Ordering code

SN-SZTK-FS-WD-19-[U]U-065-085

SN-SZTK
Series name
FS
Floor-standing
WD
Welded construction
19
19-inch rack standard
[U]
Total rack frame capacity in rack units (usable space is 3U less) — 24, 33, 42
065
Cabinet body width 660 mm (fixed, nominal)
085
Cabinet body depth 850 mm (fixed, nominal)

Example SN-SZTK-FS-WD-19-33U-065-085 Fan-Cooled Series outdoor floor-standing enclosure, 33U total frame capacity (30U usable), 660 mm wide, 850 mm deep, RAL 7035, IP54.

Width and depth are fixed; only the total frame height varies. There are no door or colour options.

Downloads