Outdoor Enclosures
SN-SZTK Fan-Cooled Series
Outdoor Wall-Mount Enclosure, IP54
Overview
Fan-Cooled Series is a range of double-wall steel outdoor enclosures designed for the installation and protection of 19-inch telecommunications equipment. The double-wall construction with non-combustible A1-class mineral-wool insulation reduces heat loss in cold weather and protects the enclosure interior from excessive heating in summer. Forced ventilation and an integrated heater provide temperature control inside the enclosure. Adjustable 19-inch mounting rails allow the mounting depth to be adapted to the installed equipment. The enclosure protects installed equipment against unauthorised access and adverse weather conditions and is suitable for wall or pole mounting. Protection rating: IP54.
At a glance
- Series
- Fan-Cooled Series
- Models
- SN-SZTK-WM-WD-19-6U-065-06 · SN-SZTK-WM-WD-19-9U-065-06 · SN-SZTK-WM-WD-19-12U-065-06
- Usable rack units
- 6U / 9U / 12U
- Construction
- Double-wall steel, A1 mineral-wool insulation
- Climate control
- Filtered forced ventilation + integrated heater
- Mounting
- Wall or pole
Numbered details in the photo
- Filtered Ventilation Upper fan extracts warm air; lower filtered inlet supplies outside air.
- Heater Integrated heater supports operation at low ambient temperatures.
- nineteen inch mounting rails Adjustable rails allow the mounting depth to match the installed equipment.
- Double-Wall Body Double-wall steel construction with A1-class mineral-wool insulation.
- Cable Entries Cable entries in the enclosure base are fitted with stepped rubber grommets to accommodate different cable diameters.
Key figures
- Height
- 6, 9 or 12 rack units
- Width
- 650mm
- Depth
- 600mm
- Static Load
- Static load 100 kilograms
- Protection
- Ingress protection rating IP54
Key features
-
Double-Wall Steel Construction
Inner and outer steel shells provide a robust insulated enclosure structure.
-
Thermostatic Control
Separate thermostats provide automatic control of the fan and heater.
-
A1 Mineral-Wool Insulation
Non-combustible insulation reduces heat loss in cold weather and limits heating in summer.
-
Filtered Ventilation
Upper fan extracts warm air; lower filtered inlet supplies outside air.
-
Integrated Heater
Integrated heater supports enclosure operation at low ambient temperatures.
-
19-inch Mounting Rails
Two 19-inch mounting rails with adjustable depth in 25 mm increments.
-
3U Electrical Control Panel
Pre-equipped with three circuit breakers, a power socket and separate mechanical thermostats for fan and heater control.
-
Enhanced Security Design
Concealed hinges, a door-to-body design that restricts tool access to the gap, and a three-bolt lever lock provide increased protection against forced access.
Applications, contents and accessories
Typical applications
- Outdoor Telecommunications Networks
- Mobile Network Infrastructure
- CCTV and Security Systems
- Industrial Communication Systems
- Remote Equipment Sites
- Outdoor Network Distribution Points
What's in the box
- 19″ Mounting Rails
- 3U Electrical Control Panel
- Cooling Fan
- Dust Filters
- Heater
- Door Opening Sensor
- Stepped Rubber Grommets
- Mounting / Installation Kit
Compatible accessories
-
Cable organizer
-
PDU
-
Shelf
Size and configuration matrix
| Model | Usable Rack Space (U) | Total Rack Capacity (U) | External Dimensions W × H × D (mm) | Usable Mounting Depth (mm) | Net Weight (kg) |
|---|---|---|---|---|---|
| SN-SZTK-WM-WD-19-6U-065-06 | 6 U | 9 U | 650 × 505 × 600 mm | 450 mm | 52.2 kg |
| SN-SZTK-WM-WD-19-9U-065-06 | 9 U | 12 U | 650 × 640 × 600 mm | 450 mm | 60.5 kg |
| SN-SZTK-WM-WD-19-12U-065-06 | 12 U | 15 U | 650 × 770 × 600 mm | 450 mm | 66.0 kg |
The top 3U are permanently occupied by the factory-installed 3U electrical control panel; the stated usable U rating is the space available for customer equipment, and the total frame is 3U taller. Static load 100 kg for all models. Cable entries: stepped rubber grommets, 8 pcs, in the base. Weights are for the empty enclosure.
Technical drawings
-
Front View
Full description of this drawing
Front elevation, generic for all three models. Overall external width 650 mm. Four Ø12 mm anchor holes for wall fixing, as marked.
-
Side View
Full description of this drawing
Side elevation, generic for all three models. Marked dimensions: internal depth 450 mm, a 50 mm offset, a 100 mm reference and 438 mm.
-
Top View — Roof Removed
Full description of this drawing
Top view with the roof removed, generic for all three sizes. Eight cable-entry holes, each fitted with a stepped rubber grommet, are arranged in two groups. Overall depth 600 mm; the internal opening is 451 mm deep, offset 125 mm and 400 mm as marked. Wall / pole bracket holes Ø12 mm.
-
General View
Full description of this drawing
Isometric general view with the door open. Two door-mounted fans and the internal heater are visible, together with the 3U electrical control panel and the 19-inch mounting rails.
Equipment and control panel
Factory-installed equipment
| Item | Specification | Qty |
|---|---|---|
| Cooling Fan | 160 m³/h, 230 V AC | 1 pc |
| Dust Filters | Replaceable dust-filter insert, 2–3 mm | 2 pcs |
| Heater | 200 W, 230 V AC | 1 pc |
| Door Opening Sensor | Magnetic reed contact sensor | 1 pc |
| Stepped Rubber Grommets | In the base | 8 pcs |
| 3U Electrical Control Panel | Occupies the top 3U of the frame | 1 pc |
3U electrical control panel — components
| Component | Specification | Qty |
|---|---|---|
| Circuit Breaker | 1P, 16 A | 2 pcs |
| Circuit Breaker | 1P, 6 A | 1 pc |
| Cooling Thermostat | Mechanical | 1 pc |
| Heating Thermostat | Mechanical | 1 pc |
| DIN-Rail Schuko Socket | 16 A, 230 V AC | 1 pc |
| DIN-Rail Neutral Busbar | Insulated, 6 × 9 mm, 10 terminals | 1 pc |
Optional equipment and systems
| Group | Includes |
|---|---|
| Sensors & Monitoring | Flood sensors, smoke sensors, vibration sensors, monitoring systems |
| Safety Systems | Door status monitoring, alarm signalling devices |
| Power Distribution & Protection | Additional circuit breakers, surge protection modules, sockets, generator inlet connectors, PDUs |
| Backup Power | Power supply systems, batteries |
Standards and certification
- 2014/35/EU Low Voltage Directive
- 2014/30/EU Electromagnetic Compatibility Directive
- EN 60529:1991/A2:2013/AC:2019-02 Degrees of protection provided by enclosures (IP code)
- EN 61439-1:2011 Low-voltage switchgear and controlgear assemblies — general rules
- EN 61439-3:2012/AC:2019-04 Distribution boards intended to be operated by ordinary persons
- EN 62368-1:2014/AC:2015 Audio/video, information and communication technology equipment — safety
Colour and ordering
Available finishes
- RAL 7035 Light grey
Ordering code
SN-SZTK-WM-WD-19-[U]U-065-06
SN-SZTK- Series name
WM- Wall-mounted
WD- Welded construction
19- 19-inch rack standard
[U]- Usable 19-inch equipment height in rack units (frame is 3U taller) — 6, 9, 12
065- External width 650 mm (fixed)
06- External depth 600 mm (fixed)
Example
SN-SZTK-WM-WD-19-9U-065-06
Fan-Cooled Series outdoor wall-mount enclosure, 9U usable equipment space, 650 mm wide, 600 mm deep, RAL 7035, IP54.
Width and depth are fixed; only the usable rack-unit height varies. There are no door or colour options.